Auto provision -- Auto updatefirmware

 Advice  your first using  auto provision  furnction 

please set as my example  except the ftp server address.

Step1

Build a ftp server  . (serv-u is very easy to use ,just click next step,or follow its wizard)

Step2

Copy the 1.txt to your ftp server home directory 

File content is as below

If later (example one month later ,you want to update firmware).You edit the the config file the first line version number . version:2.0004  to  version:2.0005 or version2.0006The version number is for deciding to update firmware or not

Step3

Set ip phone auto provision config page. 
after this setting .later ,if you want end client ip phone to update the newly firmware .end client neednt do anything except reboot the ipphone by power off and power on the power adapter.
**Commonly for carrier ,we fix the FTP/TFTP server with their user-defined firmware **

Attached the 1.txt content

<<VOIP CONFIG FILE>>Version:2.0005
<AUTOUPDATE CONFIG MODULE>
Download Username:1
Download password:1
Download Server IP :192.168.1.200
Config File Name:1.txt
Download Protocol:1
Download Mode:1
Download Interval:1
Auto Image Server:192.168.1.200
Auto Image Name:bm60200901.z
Auto Image User:1
Auto Image Password:1
Auto Image Protocol:1
<<END OF FILE>>